CVI460-VD Visual Inspection System For Inkjet Printer Vision
Inspection For Laser Marking Machine
Application:
Paper boxes, paper cards, cartons, etc.
Usage:
The finished product is formed into a single sheet through the page
header and sent to the lower station for coding, thereby reducing
manual labor and greatly improving production efficiency and coding
accuracy. Marking equipment such as small character inkjet
printers, laser machines, UV, high-resolution inkjet printers and
other supporting equipment malfunctioned during work, resulting in
leaks and leaks, and the speed of rice noodles was very fast. Using
visual inspection device to replace manual inspection greatly
improves production efficiency. The visual inspection has three
functions: the detection function of the number of characters, the
OCR detection function of the characters, the detection function of
scanning and reading QR codes and barcodes, the detection function
of the number of characters is for the detection of missing codes
and missing codes, and the character OCR detection function It is
for character stroke typo detection
Control system function software features:
All Chinese prompt information, simple operation, comprehensive
functions, easy to use
With power-off protection function, parameter data is permanently
saved
You can set parameters, choose a variety of parameters, and switch
at will
With alarm and prompt function
Features of the Vision System:
Applicable to: ink coding, laser coding detection, high-resolution coding
detection and other coding equipment coding detection, it can
detect whether the coding characters are more sprayed, less
sprayed, missing spraying, sprayed crookedly, and the coding
exceeds the area; bar code detect
Product running posture: stable, no obvious deviation, uniform
coding position
Detection accuracy: more than 1/2 of a single character is missing, the detection rate
is ≥99.99%, and the rejection rate is ≥99.99%
Automatic rejection function: The rejection rate of the unqualified products detected by the
system is ≥99.99%, and the rejection position is uniform and
accurate. The system can set if several items are rejected
continuously, the system will continuously alarm to remind the
operator to find out the reason.
| CVI450-VD Visual Inspection System |
| Model | CVI450-VD |
| Power Voltage | AC220V-50/60HZ(grounding wire necessary) |
| Power Consumption | 280W |
| Paging Belt Width | 40mm |
| Paging width | 80-380mm |
| Paging Length | 50-320mm |
| Paging Thickness | 1-5mm |
| Speed | 20-80m/min |
| Conveyor Width | 350mm |
| Conveyor Length | 1450mm |
| Dimension | 2520X530X1420mm |
| Conveyor direction | Single direction |
| Paging offset | ±0.5-2mm(depend on products) |
| Working Environment | Temperature:-10-40℃, Relative Humidity:75% |
| Air Source | 0.4Mpa |
| Unqualified Products Handle | Automatic Remove |
| Reverse Board Remove | After detecting unqualified products, remove them according to the
delay time |
| Conveyor Belt Color | Blue |
FAQ:
What is used for?
This paging system can automatically separate stacks of bags and
convey single piece onto the conveyor belt so as to facilitate
label applicator to stick each sticker onto bags and thus reduce
the trifles of manual paging to improve labeling efficiency.
This is a feeder and dispenser system which feeds labels, pouch,
cards, plastic bags, sheet paper or other flat objects at high
speed on the conveyor. It automatically separate/split/divide
stacks of pouches into single piece and deliver to the conveyor
belt so as to facilitate ink-jet printer, laser coding machine to
spray batch number, logo, anti-fake mark, pattern, QR, and bar code
on packages. It also is good auxiliary equipment for label
applicator to finish accuracy and high efficiency labeling working.
Features:
1. Multipurpose machine which can be matched with ink jet printer,
laser coding machine, labeling machine or vision camera system.
2. Reduce the trifles and of manual paging and feeding, make full use
of the advantages of accuracy and high-speed spray printing and
sticker labeling.
3. Can be equipped with the function of intelligent counting and
automatic stop to facilitate production management.
4. Reasonable structural design can be easier to replace damageable
parts.
How does it work?
Using the most advanced paging technology, bunch or stack of
products are placed in the feeding tray in this machine and get fed
by a rotating friction wheel, the bottom bag will get fed first.
The fed bag then moved forward by chains & rubber belt from one
side to the other end side.
