Description of CYCJET CVI450-VD Visual Inspection System for Coding
Machine:
Application:
Cards, bags, labels, boxes, etc.
Usage:
The finished product is formed into a single sheet through the page
header and sent to the lower station for coding, thereby reducing
manual labor and greatly improving production efficiency and coding
accuracy. Due to the physical characteristics of the product, the
splitting process will have the probability of overlapping
(overlapping) after the re-inspection device station will alarm and
stop independently (no coding and visual confusion will be caused
by the shutdown, and the two conveyor belts will operate
independently) . The coding mark needs to be checked visually, and
it must be checked with duplicate sheets. In the case of complete
duplication, (coding) is only printed on the first material above,
and the visual detection cannot detect the following product. ,
which results in the phenomenon of leaking and leaking. In the
parameter modification interface of the operation screen, there are
two kinds of settings: "Redraw Stop" and "Redraw Run". The function
of double-stretching operation means that double-stretching is
detected in real time but the line is not stopped, and the signal
is transmitted to the back-end flap for elimination. Note: This
function will cause waste of products (for example, if the double
sheet is two misplaced, at this time, the marking and coding
equipment will also code normally, resulting in inaccurate coding).
Marking equipment such as small character inkjet printers, laser
machines, UV, high-resolution inkjet printers and other supporting
equipment malfunctioned during work, resulting in leaks and leaks,
and the speed of rice noodles was very fast. Using visual
inspection device to replace manual inspection greatly improves
production efficiency. Visual inspection has three functions: the
detection function of the number of characters, the OCR detection
function of characters, the detection function of scanning and
reading QR code and barcode, the detection function of the number
of characters is for the detection of missing codes and missing
codes, and the OCR detection function of characters It is for
character stroke typo detection.
Control system function software features:
All Chinese prompt information, simple operation, comprehensive
functions, easy to use
With power-off protection function, parameter data is permanently
saved
You can set parameters, choose a variety of parameters, and switch
at will
With alarm and prompt function
Features of Overload Detection System:
Set the resize value according to the thickness of the bag
The double sheet detection will stop immediately, and the accuracy
rate is ≥ 99.99%
The re-sheet can move forward freely, and exit to take out the
re-sheet sample
Reduce manual judgment, intelligent, energy-saving production
Features of the Vision System
Applicable to: ink coding, laser coding detection, high-resolution coding
detection and other coding equipment coding detection, it can
detect whether the coding characters are more sprayed, less
sprayed, missing spraying, sprayed crookedly, and the coding
exceeds the area; bar code detect
Product running posture: stable, no obvious deviation, uniform coding position
Detection accuracy: more than 1/2 of a single character is missing, the detection rate
is ≥99.99%, and the rejection rate is ≥99.99%
Automatic rejection function: The rejection rate of the unqualified products detected by the
system is ≥99.99%, and the rejection position is uniform and
accurate. The system can set if several items are rejected
continuously, the system will continuously alarm to remind the
operator to find out the reason.
| CVI450-VD Visual Inspection System |
| Model | CVI450-VD |
| Power Voltage | AC220V-50/60HZ(grounding wire necessary) |
| Power Consumption | 440W |
| Paging Belt Width | 60mm |
| Paging width | 80-380mm |
| Paging Length | 50-320mm |
| Paging Thickness | 0.05-5mm |
| Speed | 30-100m/min |
| Conveyor Width | 350mm |
| Conveyor Length | Overlapping detection:455mm, Coding Detection:1450mm |
| Dimension | 3820X620X920mm |
| Conveyor direction | Single direction |
| Paging offset | ±0.5-2mm(depend on products) |
| Working Environment | Temperature:-10-40℃, Relative Humidity:75% |
| Air Source | 0.4Mpa |
| Unqualified Products Handle | Automatic Remove |
| Reverse Board Remove | After detecting unqualified products, remove them according to the
delay time |
| Conveyor Belt Color | Blue |
FAQ
Q1: Do you have own factory ?
We have establishes factory since 2011. We are located in Shanghai
,China.
Q2: Could you help me to operate the machine ?
Sure ,we will send you an operation file and some videos how to
operate it.ou also can contact our salesman to teach you face to
face on Whatsapp.
Q3: How long the cartridge can be used ?
We use hp45 ink cartridge,45ml, it can print about 10 thousands
time for date code,it depend on the size and ink quantity of
characters.
Q4: Do you support OEM/ODM?
Yes, we can develop the styles base on customer's requirement and
put your logo on the editing interface or the machine .
Q5: How to ensure that I received the machine undamaged?
Firstly, our package is a protector for shipment, we must confirm
machines are undamaged before delivery, and we've bought insurance
for you, we will take the responsibility if machines damaged.
Q6: what is your after-sale service for that machine?
My friend,we will offer professional stuff for after-sale service
,you can give our a call or video call to express your problem
so that we can help you,and we set up one year warranty for the
machine
